MUD VALVE

ACT Mud Valves are Forged/Cast exclusively made for mud, cement, fracturing water and steam abrasive applications. All valves are hydrostatic shell and seat tested in accordance with the API 6A /API 6D specifications. Valves are specially designed for oil-field applications like Manifolds, Pipe Line, Crude Oil and Sour Gas Line, Well Treating Chemical, Drilling Chemical, Water Flood Lines, Abrasive Drilling Mud etc.

Model – I Features

  • Designed specifically for abrasive and erosive use

  • Non directional seating and positive sealing between gate and seat

MUD VALVE

  • Easily replaceable parts without any use of accessories

  • Can be supplied with Flanged End, Hammer Union End, Threaded or Butt Weld End

  • Stainless and carbon steel insert with Nitrite/Viton elastomer in seat

  • Protected raising stem

  • Available from 2″ to 6″ with all temperature and pressure rating, up to 10,000 PSI, services as per API – 6A

Part No. & Weight
FULL PORT 2” 3” 4” 5” 6”
FLANGED
END		 PART NO.
WT (LBS)		 412-2065-
00
70		 412-3125-
00
100		 412-4065-
00
110		 412-5125-
00
330		 -N.A.-
-N.A.-
SCREWED
END		 PART NO.
WT (LBS)		 412-4385-
02
48		 412-4805-
02
53		 412-4795-
02
61		 -N.A-
-N.A.-		 -N.A.-
-N.A.-
WELD
END		 PART NO.
WT (LBS)		 412-0025-
03
48		 412-0035-
03
53		 412-0045-
03
61		 412-0055-
03
265		 412-0065-
03
221
MUD VALVE

MODEL S

  • Designed for rigorous oil field services

  • Different end connection can be obtained without changing the main body or assembly

  • Through conduit with wear plate, both sizes provide longer services

  •  Heavy duty bearing at stem provides easy operation

  • Single gate stem

  • Available with all pressure and temperature class and services as per API-6A

Part No. & Weight
FULL PORT 2” 3” 4”
FLANGED
END		 PART NO.
WT (LBS)		 412-2065-00
125		 413-3125-00
254		 413-4065-00
384
SCREWED
END		 PART NO.
WT (LBS)		 413-4385-02
85		 413-4805-02
168		 413-4795-02
250
WELD
END		 PART NO.
WT (LBS)		 413-0025-03
87		 413-0035-03
170		 413-0045-03
252

MUD GATE VALVE

ACT High Pressure Mud Gate Valves are Forged exclusively made for mud, cement, fracturing, water & steam abrasive and shipyard applications. All valves are hydrostatic shell and seat tested in accordance with the API 6A specifications. High Pressure Mud Gate Valves are specially designed for oil-field applications like Well heads, Manifolds, Pipe Line, Crude oil and Sour gas line, Well treating chemical, Drilling Chemical, Water flood lines, Abrasive drilling mud & shipyard etc. Valves are available up to 10,000 PSI WP.

These can be certified by ABS / DNV offshore or any other third party inspection.

MUD GATE VALVE
MUD GATE VALVE

Features

  • Designed specifically for abrasive and erosive use

  • Positive sealing between gate and seat

  • Easily replaceable parts without any use of accessories

  • Can be supplied with Flanged End, Hammer Union End, Threaded, Butt Weld End & Gray Lock Hub / Clamp or API 16A Hub / Clamp Type end connection

  • Protected rising stem

  • Available from 2″ to 6″ with all temperature and pressure rating, service as per API 6A

  • Single gate stem

  • Low Torque Bearing

  • Long Life Seat

Part No.
2” 3” 4” 5” 6”
PART NO. 412-1.5X85-
GL		 412-2X85-
GL		 412-3X85-
GL		 412-4X65-
GL		 412-5127-
GL
LENGTH
(L ±4")(inch)		 14.5" 15.5" 18.25" 21.75" 25.5"