ACT MODEL ‘FB-2’ AND ‘RB-2’ EQUALIZING CHECK VALVES

ACT MODEL ‘FB-2’ AND ‘RB-2’ EQUALIZING CHECK VALVES

The ACT Model ‘FB-2’ and RB-2’ Equalizing Check Valves are completion equipment, without any Locking Device. These are utilized in the following Tubing Mounted Equipment:

‘FB-2’
run in all Model ‘F’ Nipples and all Model
L Sliding Sleeves

RB-2’
run in Bottom No-Go
‘R’ Nipples

Both models are run into a Nipple Profile and hold pressure from above only. The FB-2’ model lands on the top of an F Nipple Profile seal bore. The RB2 model seats on the Bottom No-Go Shoulder of an ‘R’ Nipple.

A ‘C-1’ Running Tool is used to run both valve assemblies.

Both models can be equalized prior to retrieval, by shifting open the Equalizing Mandrel Ports. Standard Pulling Tool is utilized for retrieval of these valves.

The ACT ‘FB-2’ and ‘RB-2’ Equalizing Check Valves are manufactured for Standard, H2S and H2S-CO2 service.

Applications:

  •  Can be used as a plug to pressure test tubing.

  •  To set hydraulically actuated packer with the check valve positioned below the packer.

  •  For gas lift operations.

  •  To be used as a standing valve in wells which have downhole electric pumps.

Ordering information:

Please specify nipple model, seal bore size, check valve model, working pressure and temperature, percentage of H2S and Co2.

SPECIFICATIONS:

 'FB-2' EQUALIZING CHECK VALVES
Tubing Nipple Accessory Available To run To pull Amximum check valve OD
‘c-1 running tool Jar down pulling tool Pulling Tool type
Tubing size Nipple size Check valve
ID In Seal bore in ‘FB-2’ size Size in OTIS CAMCO OTIS CAMCO OD in
1.900  1.437 1.43 1.900   40SB6     JDC15154    40RB14  JUC15174  1.490
1.500 1.50 1.552
2.1/16   1.562 1.56 2.1/16   40SB6   JDC15154   1.615
1.625 1.62 1.672
1.781 1.78 1.865
2.3/8  1.812 1.81 2.3/8  40SB1  JDC15169  40RB17 JUC15185 1.865
1.875 1.87 40SB1 JDC15169 1.905
2.7/8  2.250 2.25 2.7/8  40SB2  JDC15171  40RB18 JUC15189 2.302
2.312 2.31 40SB2 JDC15179 2.364
3.1/2   2.750 2.75 3.1/2   40SB9   JDC15181   40RB19 JUC15191 2.802
2.812 2.81 40SB9  JDC15181  2.865
3.688 3.68 3.740
4.1/2  3.750 3.75 4.1/2  40SB10  JDC15183  40RB20 JUC15193 3.802
3.812 3.81 40SB10 JDC15183 3.875

 'RB-2' EQUALIZING CHECK VALVE

Tubing Nipple Accessory Available To run To pull Mximum check valve OD
‘C-1 running tool Jar down pulling tool Pulling Tool type
Tubing size Nipple size Check valve
ID In Seal bore in ‘RB-2’ size Size in OTIS CAMCO OTIS CAMCO OD in
1.900  1.437 1.43 1.900   40SB6     JDC15154    40RB14  JUC15174  1.427
1.500 1.50 1.490
2.1/16   1.562 1.56 2.1/16   40SB6   JDC15154   1.552
1.625 1.62 1.615
1.781 1.78 1.771
2.3/8  1.812 1.81 2.3/8  40SB1  JDC15169  40RB17 JUC15185 1.802
1.875 1.87 40SB1 JDC15169 1.865
2.7/8  2.250 2.25 2.7/8  40SB2  JDC15171  40RB18 JUC15189 2.240
2.312 2.31 40SB2 JDC15179 2.302
3.1/2   2.750 2.75 3.1/2   40SB9   JDC15181   40RB19 JUC15191 2.740
2.812 2.81 40SB9 JDC15181 2.802
3.688 6.68 40RB20 JUC15193 3.678
4.1/2 3.812 3.81 4.1/2 40SB10 JDC15183 40SB10 JDC15183 3.802