PULLING TOOL (‘R’ SERIES)

PULLING TOOL (‘R’ SERIES)

The ACT ‘R’ Series Pulling tool is used for jobs in which extensive downward jarring is required. The tool is designed to shear and release by upward jarring. These are available with four different types of cores.

  • RB : Long core, short

  • RS : Medium core, medium

  • RJ : Short core, long

  • RQ : Special core designed to latch a Quick Lock Connection (QLS) connection. Either of these tools can be changed to other types by changing the core. All other parts remain

PULLING  TOOL (‘R’ SERIES)
Nominal Size (in) Type O.D. (in) F/N O.D. (in) Pulls Neck O.D. (in) Top Conn. Reach (in) Part No.
1-1/4 RB 1.220 1.000 1.000 5/8 - 11 UNC 1.219 127RB10
1-1/4 RS 1.220 1.000 1.000 5/8 - 11 UNC 2.125 127RS10
1-1/4 RJ 1.220 1.000 1.000 5/8 - 11 UNC 1.844 127RJ4
1-1/2 RB 1.430 1.188 1.188 15/16 - 10 UN 1.265 127RB14
1-1/2 RS 1.430 1.188 1.188 15/16 - 10 UN 1.797 127RS5
1-1/2 RJ 1.430 1.188 1.188 15/16 - 10 UN 2.547 127RJ5
1-1/2 RB 1.484 1.188 1.188 15/16 - 10 UN 1.050 127RB21
1-3/4 RS 1.562 1.188 1.188 15/16 - 10 UN 1.797 127RS14
1-3/4 RJ 1.560 1.188 1.188 15/16 - 10 UN 2.550 127RJ10
2 RB 1.770 1.375 1.375 15/16 - 10 UN 1.219 127RB17
2 RS 1.770 1.375 1.375 15/16 - 10 UN 1.984 127RS6
2 RJ 1.770 1.375 1.375 15/16 - 10 UN 2.547 127RJ1
2-1/2 RB 2.180 1.375 1.750 15/16 - 10 UN 1.203 127RB18
2-1/2 RS 2.180 1.375 1.750 15/16 - 10 UN 1.984 127RS7
2-1/2 RJ 2.180 1.375 1.750 15/16 - 10 UN 2.547 127RJ2
3 RB 2.74 2.312 2.312 1-1/16 - 10 UN 1.297 127RB19
3 RS 2.74 2.312 2.312 1-1/16 - 10 UN 2.190 127RS8
3 RJ 2.74 2.312 2.312 1-1/16 - 10 UN 2.609 127RJ3
3-1/2 RB 3.110 2.312 2.75 1-1/16 - 10 UN 1.350 127RB30
3-1/2 RS 3.110 2.312 2.75 1-1/16 - 10 UN 2.100 127RS16
4 RB 3.670 2.312 3.125 1-1/16 - 10 UN 1.49 127RB20
4 RS 3.718 2.312 3.125 1-1/16 - 10 UN 2.156 127RS9
4 RJ 3.660 2.312 3.125 1-1/16 - 10 UN 2.000 127RJ6