ACT MODEL A PREMIUM BRIDGE PLUG – WIRELINE SET / DRILLABLE

ACT MODEL A PREMIUM BRIDGE PLUG – WIRELINE SET / DRILLABLE

The ACT Model A Premium Bridge Plug is a high pressure plug constructed of drillable cast-iron that uses Alpha Big Boy setting sleeves and adapter rods. It can be set on any GO or Baker type wireline pressure setting tool or pipe/coil tubing with an ACT Hydraulic Setting Tool. When set, opposing slips are located above and below the rubber packing elements. The packing elements are contained by rocker action back-up rings that eliminate extrusion of the elements at high temperatures and pressures.A one way ratchet lock ring retains the setting force applied to the opposing slips and rubber to maintain a pressure tight seal.

One-piece slips keep the plug securely set in premium grade casings including P-110. The slip wickers are sharp and hardened to the wicker depth only allowing the slip to grip the casing wall while maintaining a soft cast-iron inside for easier drilling. The upper slips remain in the set position during the drilling operation to allow gas pressure to equalize. This plug is ideal for zone isolation where squeeze cementing, fracturing or plug abandonment operations are being performed. Optional packing systems of Viton or Aflas are available on special order. Special application tools can be custom designed to fit your specific needs.

SPECIFICATIONS:

CASING MODEL A PREMIUM BRIDGE PLUG SETTING RANGE MODEL A WIRELINE SETTING EQUIPMENT RATING
OD WT Part Number OD Min Max Setting Sleeve Baker Setting Sleeve GO Adapter Rod Go PSI Temp
2-3/8 4.0-5.9 010-1710-002 Baker 010-1710-004 GO 1.710 1.867 2.041 010-1710-200 Baker No.05 010-1710-100 GO 1-11/16 Not Reqd 10,000               325 Deg F
2-7/8 6.4-6.5 010-2160-002 Baker 010-2160-004 GO 2.160 2.441 2.517 010-2100-200 Baker No. 05 010-2100-100 GO 1-11/16 Not Reqd
3-1/2 12.7-12.95 010-2750-002 Baker 010-2750-004 GO 2.500 2.640 2.750 010-2500-200 Baker no. 05 010-2500-100 Go 1-11/16 Not Reqd
3-1/2 5.7-10.2 010-2750-002 Baker 010-2750-004 GO 2.750 2.867 3.258 010-2750-200 Baker No. 05 010-2750-100 GO 1-11/16 Not Reqd
4 5.6-14 010-312-002 Baker 010-3120-004 GO 3.125 3.340 3.732 010-3120-200 Baker No.10 010-3120-100 GO 2-1/8 Not Reqd    
4-1/2 9.5-16.6 010-3593-002 Baker 010-3593-004 GO 3.593 3.826 4.090 010-3593-200 Baker No.10 010-3593-100 GO 3-1/2 010-3593-106
5 11.5-18 010-3937-002 Baker 010-3937-004 GO 3.937 4.154 4.560 010-3937-200 Baker No. 20 010-3937-100 GO 3-1/2
5-1/2 13-25 010-4312-002 Baker 010-4312-004 GO 4.312 4.580 5.044 010-4312-200 Baker No.20 010-4312-100 GO 3-1/2
6 10.5-12 010-5375-002 Baker 010-5375-004 GO 5.375 5.595 6.135 010-5687-200 Baker No.20 010-5687-100 GO 3-1/2          
6-5/8 17-34
7 32-38
7 17-35 010-5687-002 Baker 010-5687-004 GO 5.687 6.004 6.538
7-5/8 20-39 010-6312-002 Baker 010-6312-004 GO 6.312 6.625 7.263 010-6312-200 Baker No. 20 010-6312-100 GO 3-1/2
8-5/5 24-49 010-7125-002 Baker 010-7125-004 GO 7.125 7.511 8.248 010-7125-200 Baker NO. 20 010-7125-100 GO 3-1/2 300 Deg F
9-5/8 29.3-53.5 010-8125-002 Baker  010-8125-004 GO 8.125 8.435 9.063 010-8125-200 Baker No. 20 010-8125-100 GO 3-1/2
10-3/4 60.7-81 010-9000-002 Baker 010-9000-004 GO 9.000 9.250 9.660 010-9000-200 Baker No.20 010-9000-100 GO 3-1/2 010-5687-106
10-3/4 32.75-60.7 010-9437-002 Baker 010-9437-004 GO 9.437 9.660 10.192 010-9437-200 Baker No. 20 010-9437-100 GO 3-1/2
13-3/8 77-102 010-1156-002 Baker 010-1156-004 GO 11.562 11.633 12.464 010-1156-200 Baker No. 20 010-1156-100 GO 3-1/2 3,000
13-3/8 48-72 010-1200-002 Baker 010-1200-004 GO 12.000 12.175 12.715 010-1200-200 Baker No.20 010-1200-100 GO 3-1/2
16 65-109 010-1425-002 Baker 010-1425-004 GO 14.250 14.688 15.250 010-1425-200 Baker No. 20 010-1425-100 GO 3-1/2 2,000 200 Deg F
18-5/8 76-96.5 010-1725-002 Baker 010-1725-004 GO 17.250 17.655 18.730 010-1725-200 GO 3-1/2  
20 133-169