ACT MODEL ‘FB-2’ AND ‘RB-2’ EQUALIZING CHECK VALVES Actinc usa
ACT MODEL ‘FB-2’ AND ‘RB-2’ EQUALIZING CHECK VALVES
The ACT Model ‘FB-2’ and RB-2’ Equalizing Check Valves are completion equipment, without any Locking Device. These are utilized in the following Tubing Mounted Equipment:
run in all Model ‘F’ Nipples and all Model
L Sliding Sleeves
run in Bottom No-Go
Both models are run into a Nipple Profile and hold pressure from above only. The FB-2’ model lands on the top of an F Nipple Profile seal bore. The RB2 model seats on the Bottom No-Go Shoulder of an ‘R’ Nipple.
A ‘C-1’ Running Tool is used to run both valve assemblies.
Both models can be equalized prior to retrieval, by shifting open the Equalizing Mandrel Ports. Standard Pulling Tool is utilized for retrieval of these valves.
The ACT ‘FB-2’ and ‘RB-2’ Equalizing Check Valves are manufactured for Standard, H2S and H2S-CO2 service.
Can be used as a plug to pressure test tubing.
To set hydraulically actuated packer with the check valve positioned below the packer.
For gas lift operations.
To be used as a standing valve in wells which have downhole electric pumps.
Please specify nipple model, seal bore size, check valve model, working pressure and temperature, percentage of H2S and Co2.