ACT MODEL ‘LGU’ BYPASS CHOKE
The TYPE ‘LGU BY-PASS CHOKE is a Top No-Go device which is run on wireline and designed to be landed and set in the Type “L” Sliding Sleeve ideally suited for commingled production. The BY-PASS CHOKE is equipped with a ceramic flow choke which controls the flow of the zone being produced through the Sliding Sleeve. Production from the other zone flows through the bypass, but is prevented from back flowing through the choke and the Sliding Sleeve by an API ball and seat back check valve.
SPECIFICATIONS:
| Size in. | Seal Bore Size | Size | Max O.D. in. | To Run | To Pull | ||
|---|---|---|---|---|---|---|---|
| “C-1” Running Tool | “N-1” Shank | Pulling Tool | “N-1” Probe | ||||
| 2.3/8 | 1.78 | 1,78 | 1.865 | 2.3/8 | 40RB17 40SB1 JUC-TD15185 JDC-TD15169 | 2.3/8 | |
| 1.812 | 1.81 | ||||||
| 1.875 | 1.87 | 1.928 | |||||
| 2.7/8 | 2.25 | 2.25 | 2.302 | 2.7/8 | 40RB18 40SB2 JUC-TD15189 JUC-TD15171 | 2.7/8 | |
| 2.31 | 2.31 | 2.365 | |||||
| 3.1/2 | 2.75 | 2.75 | 2.802 | 3.1/2 | 40RB19 40SB9 JDC15181 JUC15191 | 3.1/2 | |
| 2.812 | 2.81 | 2.865 | |||||
| 4.1/2 | 3.688 | 3.68 | 3.740 | 4.1/2 | 40RB20 40SB10 JDC15183 JUC15193 | 4.1/2 | |
| 3.812 | 3.81 | 3.875 | |||||