ACT MODEL ‘PCMD’ AND ‘PCMU’ SLIDING SLEEVE

ACT MODEL ‘PCMD’ AND ‘PCMU’ SLIDING SLEEVE

The ACT model PCMD and PCMU sliding sleeve provides a means of communication between the tubing and the annulas. It has internal honed seal bores located at the top and bottom housing for placement of flow control devices. The internal sleeve is shifted open or closed by using a B type wireline shifting tool. For ACT model PCMD. it is down shift to open and for PCMU it is up shift to open sliding sleeve.

SPECIFICATIONS:

PCMD AND PCMU DATA SHEET
  2.3/8” 2.7/8” 3.1/2” 4” 4.1/2” 5.1/2”
SEAL BORE 1.81 1.87 2.31 2.56 2.75 2.81 3.31 3.75 3.81 4.43
MAX.
OD
3.080 3.080 3.750 4.280 4.280 4.280 5.520 5500 6.500
TOTAL LENGTH 48.99 48.99 48.63 51.67 52.37 50.00 55.25 54.89 54.30 60.64