FLUID HEATERS UNIT

Hot Water Units are the most efficient way to heat large volumes of water for hydraulic fracturing and cementing Hot Water Units are the most efficient way to heat large volumes of water for hydraulic fracturing and cementing applications under arctic and any other conditions. The unit can be built truck, trailer, skid or container mounted.

The units can be built for diesel oil ore similar fuel heating as well as with gas burners.

Constructions to heat direct Crude Oil, Brine, and Drill Mud ore Acid is possible.

Container

Completely insulated container for arctic conditions ore with air condition for hot arias, with a double door for maintenance at the rear and operation door on the right side heated by 4 x 2 kW electrical heaters and 10 kW coolant heaters from generator pack or road truck engine.

The container is completed with lights for 24 hours use.

Heat unit

We are able to install heating unit s with a capacity of 1.000 up to 5.400 kW heating power dependent on costumer need.

All instrumentation for a long term and safe use are included.

Circulation pump

To circulate the fluid to the heating unit a self-priming centrifugal pumps will be used. The pump is hydraulically or electrically driven. All necessary parts are included.

Generator

A generator is installed to power burner, heat and light.

The generator can be driven from an axially mounted engine or from the PTO of the truck engine.

Controls

For easy use all controls are installed on one panel in the container.