PULLING TOOL (‘S’ SERIES)

PULLING TOOL (‘S’ SERIES)

The ACT ‘S’ Series Pulling Tool is used to engage and retrieve equipment with an external fishing neck by upward jarring. The tool is designed to shear and release by downward jarring. With this feature the tool may also be used as a running tool. These are available with three different types of cores.

  • SB :     Long core, short reach

  • SS :     Medium core, medium reach

  • SM :     Designed to be used in gas lift  operations

PULLING  TOOL (‘S’ SERIES)
Nominal Size (in) Type O.D. (in) F/N O.D. (in) Pulls Neck O.D.(in) Top Conn. Reach (in) Part No.
1-1/4 SB 1.220 1.000 1.000 5/8 - 11 UNC 1.280 127SB14
1.66 SM 1.188 0.875 0.875 15/16 - 10 UN 1.680 127SM7
1-3/16 SM 1.190 1.188 0.875 15/16 - 10 UN 1.680 127SM7
1-1/2 SB 1.437 1.188 1.188 15/16 - 10 UN 0.688 127SB3
1-1/2 SB 1.437 1.188 1.188 15/16 - 10 UN 1.297 127SB6
1-1/2 SS 1.437 1.188 1.188 15/16 - 10 UN 1.780 127SS3
1-1/2 SM 1.380 1.375 0.875 15/16 - 10 UN 1.578 127SM3
2 SB 1.766 1.375 1.375 15/16 - 10 UN 1.219 127SB1
2 SM 1.766 1.375 1.375 15/16 - 10 UN 1.640 127SM1
2 SS 1.766 1.375 1.375 15/16 - 10 UN 2.030 127SS1
2-1/2 SB 2.188 1.375 1.750 15/16 - 10 UN 1.281 127SB2
2-1/2 SS 2.188 1.375 1.750 15/16 - 10 UN 2.000 127SS2
3 SB 2.734 2.312 2.312 1-1/16 - 10 UN 1.380 127SB9
3 SB 2.844 2.312 2.312 1-1/16 - 10 UN 1.500 127SB7
3 SS 2.844 2.312 2.312 1-1/16 - 10 UN 2.210 127SS4
3-1/2 SB 3.115 2.312 2.750 1-1/16 - 10 UN 1.690 127SB11
4 SB 3.670 2.312 2.750 1-1/16 - 10 UN 1.500 127SB10